PVC Gutter Half-Round Connector
The main purpose of an connector is to enable the installer to do an installation where it is required that the gutter must continue more than one length.
PVC Gutter Half-Round Bracket
The purpose of a gutter bracket is to hold the gutter against the roof. Fitting the correct number of brackets ensures that the gutter can hold the volume of water it was designed for.
PVC GUTTER FIRST FLUSH DIY KIT
Do it yourself first flush kit that is used to trap the initial dirty rain water and divert the clean water into your tank
PVC Gutter D-Shape Stopend
Stop ends are used to close the open end of the gutter to ensure that the water drains through the outlet and not the open end of the gutter.ß
PVC Gutter D-Shape Outlet Round
The purpose of an outlet is to connect the drain part of the gutter to the offset which is connected to the downpipe.
PVC Gutter D-Shape Corner
The main purpose of an angle is to enable the installer to do an installation where it is required that the gutter must continue around a corner of the roof.
PVC Gutter D-Shape Connector
The main purpose of an connector is to enable the installer to do an installation where it is required that the gutter must continue more than one length.
PVC Gutter D-Shape Bracket
Gutters and downpipes work together to ensure that your roofing is working to the best of its ability.
Always ensure your gutters are properly working and free from debris that could cause water to clog up and not flow freely.
PVC Gutter D-Shape
Gutters and downpipes work together to ensure that your roofing is working to the best of its ability.
Always ensure your gutters are properly working and free from debris that could cause water to clog up and not flow freely.
PVC Skirting White Moulded
Skirting is installed against the wall at the bottom where the wall and floor meets.
It is installed with Stainless Steel brackets that enable it to be clipped in and unclipped if needed.
There is ample space behind the skirting to hide cable or electrical wires etc.
PVC Manifold
Use to assemble valve sprinkler manifold.
Expandable manifolds easily connect together and no special tools required.
For use with 1 fittings.
Use only nylon or PVC fittings.
End plug at code 101305.
Solenoids at codes 101200 and 101202.
- 1 Port
- 2 Port
- 3 Port
- 4 Port
PVC Gutter Round Offset Bend
Offset bends are fitted over the outlet and into the downpipe to connect the gutter and downpipe that runs down the building.