PVC Barge Connector
Barge Board Connectors is used to connect or join 2 barge boards.
PVC Barge Board
Barge Boards is normally use on pitch roofs to finish off where the roof tile and wall meets.
- 4 m
- 6 m
PVC Fascia Connector
Fascia Board Connectors is used to connect or join 2 fascia boards.
PVC Fascia Board
Fascia Board is used on the side of the roof trusses behind the gutters to give a neater finish.
- 4 m
- 6 m
PVC Ceiling Profile UV Stable
This ceiling is maintenance free and have good thermal properties. The finish is smooth and is only available in white. It is also good for exterior use such as garage doors and gates.
PVC Ceiling Profile Starter
This product serves as a corniche. This is to start and finish the sides/ ends of ceilings
PVC Board Fixing Screw & Cap
Fixing Screws and Caps are used to fix barge and fascia board to the wall or trusses. It is a Stainless Steel screw with a white plastic cap.
PVC Gutter Round Downpipe
Depending on the type of roof, the norm is one downpipe per every 3m of guttering - this will ensure sufficient drainage of the gutter to prevent it from overflowing.
PVC Gutter Half-Round Stopend
Stop ends are used to close the open end of the gutter to ensure that the water drains through the outlet and not the open end of the gutter.
PVC Gutter Half-Round Outlet Round
The purpose of an outlet is to connect the drain part of the gutter to the offset which is connected to the downpipe.
PVC Gutter Half-Round Corner
The main purpose of an angle is to enable the installer to do an installation where it is required that the gutter must continue around a corner of the roof.