Waste Bend Vent Horn 87.5 Degrees 110 mm
Vent horn bends are used where a vent valve needs to be mounted.
Soil, vent and waste fittings are designed for use above ground, in direct sunlight and for the conveyance of waste water.
Waste Vent Valve 2-Way Econo
Vent valves were designed as replacement for vent pipe used to ventilate drainage systems. Reduces the expense of the vent pipe and roof flashing. The one-way valve acts as a vacuum relief valve by letting air in. Internal or external use. The two-way valve lets air in and out. External use only.
Waste Bend Vent Horn 87.5 Degrees
87.5 degree 110mm above ground Bend Vent Horn to change direction of pipework and to connect to a 50mm Vent Valve.
Vent horn bends are used where a vent valve needs to be mounted. Soil, vent and waste fittings are designed for use above ground, in direct sunlight and for the conveyance of waste water.
Pan Connector STR + Fins RA372
RA372 straight pan connector for flush installations, fins seal the connection, not necessary for putty or wax sealants.
Pan Connector Offset + Fins RA374
RA372 straight pan connector for flush installations, fins seal the connection, not necessary for putty or wax sealants.
Magicflex D50 Monobloc FXF White
Magicflex D50 flexible connector for installations in difficult angles. 0 ? 180 Degrees.
Magicflex D40 Monobloc FXF White
Magicflex D40 flexible connector for installations in difficult angles. 0 ? 180 Degrees.
Jollyflex Short
Jollyflex short pan connectors for difficult pan installations.
Jollyflex Extr Short
Jollyflex extra short pan connectors for difficult installations.
Jollyflex Extendable
Jollyflex extendable pan connector, extends to 750mm.
-
- 110mm L750mm
Extendable Connector Tube
Universal extendable connector pipe with a 32/40mm female connection and a 40/50 solvent connection.
Waste Bend 45 Degrees 50 mm
Bends are used to get a 45 degree angle when joining pipes. Soil, vent and waste fittings are designed for use above ground, use in direct sunlight and for the conveyance of waste water.