Orbit End Plug Slip Lok Brass
The brass end plug is used to easily and effectively stop water flow at the end of a mist system line that uses a Slip-Lok fitting. The end plug is used 3/8 misting pipe ,ORBIT MISTING PIPE 3/8 6MT.
Orbit Elbow Slip Lok Brass
The Slip-Lok elbow is used to connect outdoor mist cooling system lines and assembles in seconds with a simple insert and twist motion. The unique brass Slip-Lok design can be used with both low and high pressure systems as the elbow actually grips tighter when the pressure increases. Use with code ORBIT MISTING PIPE 3/8 6MT.
Orbit Misting System Cleaner 225g
The mist nozzle cleaner is specifically formulated to gently clean mist nozzles clogged with mineral deposits. It is easy to use, biodegradable, and safe on brass, stainless steel and plastic.
Orbit Misting pipe Connector Brass
The hose adapter connects outdoor mist cooling system lines to a standard garden hose for water supply. The unique brass Slip-Lok design can be used with both low and high pressure (up to 10 bar) systems as the adapter actually grips tighter when the pressure increases. Use with ORBIT MISTING PIPE 3/8 6MT.
Orbit Misting Kit Outdoor 3/8”
Attaches to any garden hose
Reduces outdoor temperature with as much as 11 deg C
Can be clipped to an umbrella
Blank pipe from tap to point of installation and further 3.7m of misting total of 6m
Orbit Misting Kit Outdoor ¼ inch Small
The Portable Preassembled Mist Cooling Kit provides relief from the heat wherever you need it. This preassembled kit provides mist cooling and cools the surrounding air temperatures by up to 6 deg C. Simply attach the convenient alligator clips to an umbrella, awning, fence or other structure and then connect to a standard garden hose to immediately experience the benefit of mist cooling. Great for cooling your outdoor living areas. Install in less than 10 minutes. Attaches to any standard garden hose. 4 Year warranty. Portable Mist Cooling Kit consist of 3.7m mist tube and 2.4m blank feeding tube. Preassembled 1/4 inch. (6) Brass and stainless steel mist nozzles (1) Hose Washer (5) Hanging Snap Clips
Orbit Misting DIY ½” 5.4m
Enjoy the outdoors again with the Orbit Performance 1/2 PVC Mist Cooling System. It is the perfect rigid cooling solution for home patios and outdoor recreational areas. It also works equally well for animal shelters and dog runs, while reducing surrounding temperature up to 20 degrees Fahrenheit. This kit includes everything needed to easily assemble 10' of mist cooling line with no special tools needed. The system can be expanded up to 250' with sufficient available water pressure. Includes: (9) Lengths of 1/2 x 21.75inch PVC pipe, (6) 1/2 PVC Fittings (3 elbows, 2 couplings, 1 cap), (6) Mist Nozzles, (7) PVC Mist Fittings, (1), Swivel Hose Adapter, (9) Mounting Clips, (1) Automatic Drain Valve, (1) Hose Washer, (1) PVC Cement. The Mist Cooling System is for outdoor use with cold water only. Do not use with a booster pump.
Orbit Misting Extension Kit Outdoor
Want to get more out of your outdoor mist system
The Basic Extension Mist Cooling Kit lets you extend the length of your mist system, giving added cooling performance to your outdoor space
Simply attach to existing Basic Mist Cooling Kit (102003) and wrap the kit where you want it to go
Includes: (10 ft.) Pre-assembled 3/8 inch Flexible Tubing, (5) Brass and Stainless Steel Mist Nozzles, (10) Mounting Clips
Orbit Mister Nozzle 5 Pack
The Brass and Stainless Steel Misting Nozzle is the most efficient and water-conservative mist nozzle available today. It only uses 1/2 gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance: just soak periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Includes: 5 Misting Nozzles
Orbit Mister Drain Valve
Auto mist drain valve is an essential component to any outdoor mist cooling system.
The drain valve is used to drain water from the mist line when not in use.
Opens as a syphon by drawing out the water.
Installed at the low point in mist line.
Installation either thread into a 10/24 female nozzle or insert into a slip-lock fitting.
Orbit Tee Slip Lok Brass
The Slip-Lok Tee is used to connect outdoor mist cooling system lines and assembles in seconds with a simple insert and twist motion. The unique brass Slip-Lok design can be used with both low and high pressure (up to 10 bar) systems as the tee actually grips tighter when the pressure increases. Use with code ORBIT MISTING PIPE 3/8 6MT.
Orbit Slip Lok Coupling Brass
The Slip-Lok coupling is used to connect outdoor mist cooling system lines and assembles in seconds with a simple insert and twist motion. The unique brass Slip-Lok design can be used with both low and high pressure (up to 10 bar) systems as the coupling grips tighter when the pressure increases. Use with codes ORBIT MISTING PIPE 3/8 6MT.